
BASE TYPE
ZX-750V5T
High speed and heat are his speciality
ZX-750V5T - is a thermoplastic material with antifriction characteristics based on polyimide (PI).
The latest development in the field of materials for high speeds and high temperatures. Particularly suitable for sliding speeds beyond 200 m/min and temperatures exceeding 300 °C.
Plain bearings slideways made of polymers ZX-750 should be applied if the use temperature exceeds +100°C, and the durability and dimensional stability need some improvement.
FEATURES
-
Stiff, hard, tough
-
High dimensional stability
-
High fatigue strength
-
Chemical resistance to solvents, dilute acids, alkalis, petroleum products
-
Good machinability, suitable for bonding and welding
-
Suitable for use in vacuum
-
Contains PTFE
CHARACTERISTICS
-
Working temperature: -250°C to +300°C (+320°C)
-
Surface pressure (p): max. 41 (125) MPa
-
Sliding speed (v): max. 350 m/min
-
Fatigue (S): tensile fatigue strength at 20 °C and 1E06 stress cycles, 1 Hz = 35 MPa
-
UV-radiation: resistant (1000 hours Xenon DIN 53597). Gamma-radiation: Limit absorbed dose 8000 kGy
-
Water: max. water absorption: 0.7 %, up to +120°C resistant
-
Fire behavior: Oxygen index (LOI): 52 %, classification: V-0 (UL94). Fireproof
ADVANTAGES
The advantages of ZX-750V5T over PEEK (polyetheretherketone):
-
10 times higher pv-value, the best results of the work without lubrication
-
5 times higher notch impact strength
-
20-80 times higher durability when operating up to +100°C
SUPPLY

Rods (diameter 6÷210 mm)

Tubes (outer diameter 30÷350 mm)

Sheets, thickness of 6; 8, 10; 15; 20; 26; 32 (370x1000 mm or 370x2000 mm)

Sheets, thickness of 24 mm (120x1000 mm or 120x2000 mm)

Details based on customer’s drawings

Granulate
