AGRICULTURE INDUSTRY

 EFFICIENCY AND SUSTAINABILITY IN AGRICULTURE

The usage of engineering polymers in the AGRICULTURE INDUSTRY
 - ZEDEX, INKULEN PE-1000/500, INKUMER EL

​

We reccomend to use high-performance materials:

​

  • INKULEN PE-1000/500 - ultra-high molecular weight / high molecular polyethylene of very high degree of polymerization with special additives. 

  • INKUMER EL is a polyurethane elastomer based on MDI with hardness of  55, 60, 65, 70, 75, 80, 85 and 90 Shore. 

  • ZEDEX is an anti-friction wear-resistant polymer. The main purpose of ZEDEX antifriction materials is to solve the problems of wear in the friction/sliding units and mechanisms, replacement of standard materials such as bronze, polyamide (caprolon), fluoroplast, textolite, polyacetal (POM-C), CAM, cast iron, metal-fluoroplastic bell and other materials in equipment and machines. It is designed for the manufacture of wear-resistant parts: sliding bearings, bushings, inserts, rollers, nuts, warm wheels, etc.

ADVANTAGES

Learn more about the benefits of using ZEDEX polymers in your machines.

  • Sliding properties of ZEDEX are better than bronze. Low coefficient of friction and high anti-friction properties significantly increase the service life of the unit.

  • ZEDEX can operate without lubrication. Failure in the lubrication system does not lead to an emergency and «tear».

  • Reducing the noise of sliding units, shock and vibration resistance. ZEDEX does not require running-in due to increased elasticity. High positioning accuracy and smoothness of movement on small feeds.

  • Work in polluted conditions, high abrasion resistance. Not subject to corrosion. Higher resistance to chemicals in comparison with bronze.

  • Thanks to a wide range of ZEDEX sizes allows you to fit in the semi-finished parts to the final size, and thus reduce the price, processing cost and time of the material.

  • Dimensional stability: moisture absorption coefficient up to 0.3% (by caprolon up to 2%, mechanical properties are reduced twice). Under load is unyielding.

  • Frost resistance: temperature up to - l 00 °C.

  • Stability of properties during long-term service.

AREA OF APPLICATION

Discover a selection of application areas for our materials.

  • BUSHINGS IN AGRICULTURAL MACHINERY

    With the use of the ZX-100K, friction and wear of bushings have been significantly reduced. Also the need for maintenance has been reduced, and the service life of the sliding bearing has been increased at twice.

  • REAR-AXLE SUSPENSION

    ZX-100K (based on PET) on sleeves rocker rear-axle suspension (instead of bronze). The balancer seat does not break and the axle does notwear out.

  • BEARINGS IN HARVESTING MACHINES

    Through the use of the ZX-100MT (based on PET), friction and wear as well as the need for maintenance have been reduced and at the same time has been extended the service life.

  • BODY SLEVES FOR CULTIVATORS

    Sleeve made of material ZX-100K (based on PET) in the working body of the cultivator (the rolling axis) - serial production.

  • BALANCE AND LEVER BUSHINGS

    Balance and lever bushings in hitch equipment of the agriculture machinery.

  • BUSHINGS IN LIFTING MECHANISMS

    In lifting mechanisms, the ZX-410 bushings resist load up to 110 MPa at simultaneous edge pressure and impact.

  • ROLLING BEARINGS

    324VMT as a replacement of rolling bearings, in dry operation at t 286°C and steam pressure, high resistance to abrasive particles.

  • LINING OF TRUCK BODIES AND TRAILERS

    INKULEN PE (UHMWPE/HMWPE) for lining of truck bodies, trailers and semi-trailers.

  • LINING OF WORKING SURFACES

    Lining of INKULEN PE (UHMWPE/HMWPE) significantly increases the service life of the working surfaces (protection against sticking, freezing and abrasive wear).

  • LINING OF GUTTERS AND BUCKETS

    Lining of gutters and buckets material of INKUMER EL (polyurethane elastomer / PU). Type of delivery: sheets, rods.

LEARN MORE ABOUT OUR MATERIALS.

+7 (343) 384-57-38

620043, Sverdlovskaya oslast,

Yekaterinburg, Volgogradskaya st., 193,

office 704/1

mon - fri: 09:00 - 18:00

dinner time: 12:00 - 13:00

sat - sun: weekend

All materials are property of their owner, and are protected by the law of the Russian Federation "On Copyright and Related Rights". Using text and photos without written permission forbidden.